Machine Accessories
Magnetic Featherboards
Magswitch Starter Kit
Pro Vertical Featherboard
The Pro Vertical Featherboard is a table saw safety attachment
which pushes the workpiece down against the table
during feeding to prevent ride-up and kickback. Attach it
to ferrous Biesemeyer-style table saw fences between the
low-friction guide faces and adjust the feathers vertically to
match the height of the workpiece. It can be paired with a
second Pro Vertical featherboard for downward pressure on
a work piece before and after the saw blade.
Unlike regular feather boards which are essentially tied to
a miter slot, Magswitch feather boards can be attached
anywhere on the steel table or fence. They utilize the
same 20mm Mag Jig that's sold separately. The Vertical
Featherboard attachment can be added to keep constant
down force on your work piece.
The Perfect entré into the Magswitch Workholding System.
The Starter Kit comes complete with the Reversible
Featherboard Attachment, the Universal Mounting Base
and two MagJig 150's. Once you have this tool, get all the
other great tool attachments and simply mount to the base
as needed. The kit features core advantages of Magswitch
including fast, strong set up anywhere on a steel or cast Iron
table and is not limited by the miter slot. The Featherboard is
reversible for left and right hand feeds. It accommodates the
Vertical Featherboard Attachment for an added dimension of
safety and protection against kickbacks.
STARTER KIT WITH BASE, MAG JIG AND
FEATHERBOARD MT10134 ..................$99.95
PRO TABLE FEATHERBOARD 30MM
MT10328 .......................................................$72.99
VERTICAL FEATHERBOARD ATTACHMENT
MT10339 .......................................................$21.49
PRO VERTICAL FEATHERBOARD
MT01302 .......................................................$69.99
Pro Universal Featherboard
Universal Featherboard
The Universal Model utilizes
the same magnetic
designs of their other
models, but it is much
more versatile in that it
can be used on either
side of the blade and
even on fences.
MAGSWITCH
ULTIMATE
THIN STOCK
JIG /RIP
GUIDE*
MT10362 .....................................................$25.99
The all Magswitch Universal Featherboard Pro provides
strong featherboard force against the table saw fence in
either left handed or right handed positions. Wide base
magnets and gaskets provide excellent grip even when
placed over the table saw miter slot. Additionally two micro
adjustable bump feet allow the tool to function as a versatile
stop for cross cuts and slots.
UNIVERSAL FEATHERBOARD MT10015 ....$56.99
Board Buddies
PRO UNIVERSAL FEATHERBOARD
MT01303 .......................................................$85.99
MAGSWITCH
DUAL ROLLER
GUIDE*
MT10130.....$29.99
Universal Saw Indicator
The Universal Saw
Indicator is used to
measure alignment of
the table saw blade
relative to the table
(and the miter slot) to
allow fine adjustment
of blade parallelism.
When adjusting fence
spacing relative to the blade, it can also be used to measure
very small changes in fence parallelism. Attach it to steel
cross fences (which ride in the miter slot) or to ferrous table
saw tables. The indicator is attached via an adjustable slot,
allowing it to slide to fit a wide variety of miter slot spacings.
Board Buddies are an anti-kickback device ideal for table
saw and router table fences. The high grip rubber wheels
help hold the stock snug against the fence while cutting
or routing. Not only do they hold the stock against the
fence, the wheels only turn clockwise which helps in the
case of kick back. Mount to fences 3" x 3.5" high and 1"
or wider. A 24" accessory track is sold which allows the
Buddies to slide to any spacing. Only sold in pairs.
YELLOW WK11040 ..............................$64.95
24" TRACK WK11080 ..............................$26.95
MAGSWITCH RESAW GUIDE*
MT10125 ....................................................$27.99
* REQUIRES MAGSWITCH STARTER KIT
MITER SLOT INDICATOR
MT01304 .......................................................$95.99
Milescraft Featherboards
Mag Jig
Milescraft Grabber
The Mag Jig is the
perfect accessory
for the woodworker
that likes to make his own
jigs. Any jig that is used on a cast iron or steel surface
can be made more efficient and user friendly with Mag
Jigs. Instead of covering the surface with C clamps and bar
clamps, the Mag Jig is a clamping device that's built into
the jig. A quick drilled hole is all that's needed to mount the
Mag Jig. Once installed in the hole, a simple 1/4 turn of the
knob either engages or releases the magnetic force. 20mm
jigs requires a 30mm hole/30mm jig requires a 40mm hole
MAG JIG 20MM MT06004 .......................$31.99
MAG JIG 30MM MT06005 .......................$42.99
These Milescraft featherboards work on
both table saws and router tables, on the table top or the
fence. It comes with everything needed to mount, including
5/8" and 3/4" miter bars. The dual/tandem model can be used
as one or taken apart and used individually.
FEATHERBOARD WS14060 ....................$15.99
DUAL/TANDEM WS14070 ....................$32.99
The Milescraft Grabber is ideal for
use on router tables, table saw, jointers
and even band saws. The grabber has a very
grippy ergonomic handle and an even stickier rubber
base which will help you keep your hands away from the
blades and your work piece secure. Measures 3-1/4" x 7-3/4"
MILESCRAFT GRABBER WS34030 ........$10.99
