Machine Accessories
GuidePro
FencePro Featherboard
Incra Miter Channel
Works with INCRA Miter
Sliders and INCRA Miter
Gauges or any standard
3/8" by 3/4" miter bar. T-Slot
design helps with hold down
capability and they are
made of hard anodized aluminum
for durability. Mounts
easily with pre-drilled holes
and included fasteners. Cut
a 1-1/8" wide by 1/2" deep groove in your application to fit
the INCRA T-Slot Miter Channel. When installed, the Miter
Channel should sit slightly below the surface of the table.
Attach using the supplied fasteners.
32" INCRA MITER CHANNEL IN00032 ...$19.95
48" INCRA MITER CHANNEL IN00048 ...$27.95
FencePRO Featherboard protects you against kickback
far better than plastic or wood feathers. EVA is a High
Density closed cell material that is exceptionally durable
and absorbs energy from kickback. Feathers are also
shatterproof and unlike plastic feathers can be replaced
if damaged. FencePRO offers benefits you simply cannot
get with plastic or wooden feathers. Use FencePRO with
our FeatherPRO featherboards for the ultimate in feed
control and safety. FencePRO comes in a 2- pack for use
separately or for stacking.
FENCEPRO FEATHERBOARD 2PK
BP06423.......................................................$39.99
GuidePRO is the ideal accessory for all band saw owners.
Whether re-sawing dressed lumber or rougher pieces, the
GuidePRO, with its flexible silicon feather, will maintain constant
pressure between the work piece and the fence helping
ensure the squarest cut possible. Just slide the GuidePRO
into the miter slot, rotate it clockwise until it stops and push
the GuidePRO against the work piece and fence with desired
pressure, then press down the locking lever to secure the
work piece. Be sure to keep the feather near the leading edge
of the work for the cleanest cut. The GuidePRO Extension
adds 4" of height to the GuidePRO and comes with a 10"
feather. The GuidePRO Anchor Bar is used to adapt the
GuidePRO to use on a router table or table saw.
GUIDEPRO BAND SAW GUIDE
BP06270 .......................................................$79.99
EXTENSION BP06287 ...................$19.99
3/4" ANCHOR BAR BP06294....................$24.99
Pushpro Push Stick
Featherpro Featherboard
Featherboard jig not included.
AngleCube Bevel Gauge
Featuring High Density Foam tips, PushPRO improves feed
control, protects wood, reduces vibration on the hands and
protects you and your tools in case of accidental contact
between the Push Stick and the blade.
PUSHPRO PUSH STICK BP06300 ..........$19.99
REPLACEMENT TIPS BP06324 .................$4.99
The FeatherPRO not only provides better protection
against kickback, but also makes the infeed much
smoother and easier than that of a rigid plastic feather
board. Hardened, non-marring foam feathers provide up
to 90 lbs of kickback resistance and will not harm carbide
tip blades or router bits if contacted. If the feathers are
damaged, they can be easily replaced
FEATHERPRO FEATHERBOARD
BP06096 ......................................................$29.95
REPLACE FEATHERS STANDARD
BP06126 ......................................................$14.95
Miter Track Accessories
RECTANGULAR NUTS
1/4-20 (10PK)
PK13011 .......................$3.95
HEX HEAD BOLT 1/4-20 X 3"
(10PK) PK13030 ............$2.95
Setting the angle of your table saw blade is very easy when
using the AngleCube. Simply place the AngleCube on the
table surface and press zero. Then attach the magnetized
AngleCube on the saw blade to see the relative bevel angle
between your blade and table top. The tilt range is between
0 and 90 degrees. The AngleCube now runs on a rechargeable
battery and includes a usb charging cable.
ANGLECUBE BEVEL GAUGE IP35226 ...$39.95
STEEL T-SLOT BOLTS 5/16"-18 - 10 PACK
1" WK48370................$8.95
1-1/2" WK48380..............$10.95
2-1/2" WK48390 .............$12.95
3-1/2" WK48400 .............$12.95
KNOB 5 PRONG 5/16"-18
WK48460 ................................$2.95
KNOB FOUR ARM 5/16"-18
WK48500 ................................$2.95
KNOB ERGO STYLE THRU HOLE
1/4"-20 WK48520...................$2.95
KNOB T-STYLE 5/16"-18
WK48840.......................................$3.95
KNOB FOUR ARM THRU HOLE
1/4"-20 WK48860 .......................$2.95
KNOB FOUR ARM THRU HOLE
5/16"-18 WK48870.......................$2.95
KNOB ERGO STYLE THRU
HOLE 5/16"-18 WK48880 ...........$2.95
KNOB MINIATURE 10-24 STUD(2PK)
WK48890.......................................$2.95
CAM ACTION HOLD DOWN 1/4 20 TPI
WK45470 .....................................$9.95
Featherboard Stackable Kit
Incra Miter Slides
The Featherduo is ideal for feeding taller material on
table saws, band saws and router tables. Hardened,
non-marring foam feathers provide up to 90 lbs of kickback
resistance and will not harm carbide tip blades or
router bits if contacted. If the feathers are damaged,
they can be easily replaced. Includes two standard
replacement feathers as a bonus. Hardware fits 3/4
miter track; also Includes 1/4*20 T slot hardware The
Duo can be separated and used as two individual
feather boards.
FEATHERDUO STACKABLE
FEATHERBOARD KIT BP06133 ..............$59.99
These miter sliders are the best way to make a variety of jigs.
Each miter slider is machined perfectly to fit in a standard 3/8"
x 3/4" miter track and is adjustable for a perfect, no slip fit.
Included with each miter slider are plans to build a crosscut
jig, tenoning jig and a featherboard. Each sold individually.
INCRA MITER SLIDER
18" IMS-101 ................................................$21.95
24" IMS-102 ................................................$27.95
