Dust Collection
Fein Turbo I Dust Extractor
FEIN ACCESSORIES
FLEECE FILTER BAGS
9-92-27 5PK FE31345.....$39.95
9-20-28 5PK FE62010 ....$51.95
OLDER MODEL FEIN PAPER
DUST BAG 3PK
TURBO I FE13038 .......$18.95
TURBO II FE13036 ......$19.95
Dust Hose Hangers
• High performance turbine for
151 cfm (71 l/s) flow rate
and 98.4" of water lift (245
mbar vacuum)
• Low volume of 66 dB
• Large wheels rotate 360°
for optimal maneuverability,
even in tight
conditions
• Tool coupling with
suction control
for easy control of
suction power
• Autostart outlet with power-on delay to
prevent current spikes
• Practical storage area with rim
Metal hose hangers are mandatory for a properly installed
dust collection system. They not only keep the hose in
place and out of the way, but they also provide a place to
help conceal the grounding wire.
FEIN TURBO VAC
ACCESSORY SET
2 Suction Tubes,
Combination Nozzle,
Crevice Nozzle, Round
Brush, Elbow Handle
FE71020 ..............................................$120.95
FEIN PERMANENT FILTER
FLEECE TURBO I & II
FE64010 ..............$97.95
Quantity 1 10 20
2-3/4" WK21050 $1.29 $1.19 $.99
3-1/4" WK21060 $1.29 $1.19 $.99
4-1/4" WK21070 $1.39 $1.29 $1.19
TURBO I 25 LITER DUST EXTRACTOR
Power consumption: 1,100 Watts
Capacity: 5.8 gal
Power Cord: 19 ft & Vacuum Hose: 13 ft
Weight according to EPTA: 17.9 lbs
FE92027 ..............................................$318.95
Contractor Saw Dust Collector Bag
I-Socket Autoswitch Workshop
Dust Collection
Accessories Kit
With the i-Socket, you will have
instant, tool activated dust
collection with your hand held
power tools. Simply plug the
i-Socket into you wall outlet,
plug in the power tool and the
shop vac into the appropriate
sockets and you will have dust
collection when you turn on the
tool. Your vac will continue to
run for approximately 7 seconds after you turn
off your tool. The perfect accessory for many
shop power tools.
I-SOCKET AUTOSWITCH WORKSHOP
DG12000 .....................................................$49.95
With this Dust Collection Accessory Kit, you are basically
adding an upright vacuum cleaner to your dust collection
machine. It connects directly to you 4" dust collection hose.
The kit includes a 4" quick connect blast gate, bench brush
attachment, floor sweep attachment with swivel caster, quick
connect coupler, quick connect hose attachment, two adjustable
handles, four mounting brackets and a 4" x 3' clear pipe.
DUST COLLECTION ACCESSORIES KIT
WK37560 ...............................................$89.95
The Dust Cutter Dust Collection bag is perhaps the
easiest option for dust collection on your contractor
saw. It fits any contractor saw type machine that has
an enclosed motor and a base measurement of up to
23" W x 19" D . The bottom of the bag has a zipper
to allow for easy cleaning without removing the bag
from the saw. Leaving the zipper undone, a funnel is
created that will drop the dust into a pan or container
of your choice. With the zipper closed, you can also
connect either a 1-1/4" or 2-1/2" dust collection hose
to the bag. Use gravity or suction, the choice is yours.
DUST CUTTER DUST COLLECTION
SYSTEM FOR CONTRACTOR SAWS
WS15000 ..........................................................$29.99
Lathe
Dust Hood
Opening measures
8" x 8" and accepts
a 4" hose.
BH19217 .....$32.95
Rikon Portable
Dust Collector
Long Ranger Remote
Rikon’s 1 HP Portable Dust Collector is a
great size for many uses in the small
shop. With a single 4" dust port
that draws 660 CFM, this unit has
more than enough vacuum power
for big chip makers, like jointers
and planers.
Also, with built-in casters and
a handle, moving it about is easy.
The 60-105 features an adjustable pipe
extension with chip collecting funnel that can be positioned
high for use with lathes, drill presses, workbenches
etc. It also includes a 2 micron cloth filter bag, 108" long x
4" dust hose, adjustable pipe & funnel attachment system,
safety on/off switch, and wall mounting brackets.
PORTABLE DUST COLLECTOR 1HP
RK60105 .......................................................$329.99*
* $30 Additional Shipping Charge
Turn on your dust
collector from up to 50’
away with a Long Ranger
remote switch
110V STARTER
PI11030 ..........$79.95
220V STARTER
PI22030 ..........$89.95
Filter Dustbag
This 1 micron top bag fits various size
dust collectors and allows plenty of air
flow while remaining 99% efficient.
FILTERING TOP BAG
1 MICRON FILTER DUSTBAG
15" BH11761 ....................$38.95
14" BH11763 ....................$38.95
20" BH11765 ....................$59.95
DISPOSABLE BOTTOM CLEAR
DUST BAGS 5PK
14" D X 32" BH11778 ....................$13.95
20" D X 42" BH11781 ....................$18.95
16" D X 47" BH11785 ....................$15.95
19.5" D X 33" BH11789 ....................$14.95
14" BAND CLAMP BH11775 ...............$20.95
20" BAND CLAMP BH11777 ...............$25.95
Jet RF Remote Control
/ Dust Collector
Radio frequency transmitter allows remote
on/off control of your dust collector without
the need for a straight line of sight.
Simply plug in your dust collector to the
transmitter for instant remote control,
no wiring needed. Works with all Dust
Collection units 1-3/4 HP and smaller
(115V ONLY)
Jet RF Remote Control
J708636C .......................$129.95
