Clamps
Wonder Dog Clamp
Auto Adjust Toggle clamps
Cabinetry Clamp
The BESSEY Auto-Adjust Toggle Clamps automatically
adjust to variations in work piece dimensions while
maintaining constant clamping force. This clamping
force can also be easily adjusted making these
clamps more versatile than ever.
The cabinetry
clamp is designed
to combine the multiple steps of
face frame cabinet installation into one
easy process. Face frame stiles can be tightened,
aligned, pre-drilled and fastened all while
the clamp is in place. The clamp holds the individual cabinet
edges together while also keeping the faces along the joint
flush. There is an integrated pilot-hole drilling guide on one
end. This guide flips out of the way so you can drive screws
to connect the cabinets without removing or repositioning the
clamp. accomplished by rubbing the scratch with the wax
stick until filled. The final step is to level off the repair excess
material with the built in leveler. The repair, color replacement
and filling, all done with one product.
BESSEY CABINETRY CLAMP / FACE FRAMES
AC85110 ......................................................$26.95
13/16" VERTICAL TOGGLE CLAMP
450lbs capacity AC55552 ...$27.95
1-9/16" VERTICAL TOGGLE CLAMP
700lbs capacity AC55555....$28.95
The versatile Wonder Dog clamp can be used anywhere
you can drill a 3/4" hole. Using a Wonder Dog in combination
with a standard round bench dog, you can make a
clamp of any length by drilling 3/4" holes in a 2 x 4, 2 x 6,
etc. At the lowest projection, only 5/8" of the dog head is
above the bench. The swivel handle lets you apply ample
clamping pressure in any position. The dog is drilled and
tapped at a 3° angle to ensure that work is held tight to
the bench. The Wonder Pup is the same as the Wonder
Dog in all respects, except that the post is shorter (2-3/4"
instead of 6-1/2") and has no side spring.
WONDER DOG VT05101 ..........................$39.95
WONDER PUP VT05102 .........................$36.95
13/16" HORIZONTAL TOGGLE CLAMP
450lbs capacity
AC55020 ................$24.95
2" HORIZONTAL
TOGGLE CLAMP
700lbs capacity
AC55050 ..................$28.95
2-3/4" HORIZONTAL TOGGLE CLAMP
700lbs capacity AC55070 .................$29.95
Veneer Press Clamp
Although considered the clamp of choice
for making a veneer press, these clamps
are also ideal for any number of custom
fixtures for all types of gluing, veneering,
welding and assembly.
Overall length is
11-1/2".
GearKlamp
3/8" INLINE TOGGLE CLAMP
450lbs capacity
AC55015 ..............$28.95
5/8" IN-LINE
TOGGLE CLAMP
700lbs capacity
AC55025 ..............$29.95
The new GearKlamp provides a unique
clamping solution in tight spaces and
everywhere else quick and secure clamping
is needed. Most clamps use a tightening
handle which is in line with the clamping
pads, making them hard to tighten in
tight spots. The GearKlamp can be easily
moved into position using the quick release
button and tightened using the ratcheting handle
located on the bar. This is the ideal clamp to use in
cramped locations, when up against another object
or when reaching into a space to clamp.
BESSEY GEAR CLAMP
6" x 2-1/2" AC20442 ..............$22.95
12" x 2-1/2" AC20443 ..............$26.95
18" x 2-1/2" AC20444 ..............$28.95
24" x 2-1/2" AC20445 ..............$29.95
VENEER PRESS CLAMP
WK28930 ....................$15.95
23' Strap Clamp
Toggle Clamps
The Bessey variable angle strap clamp has two distinguishing
features that separate it from other
generic strap clamps. First, the geared
winder simultaneously tightens both
sides of the strap. Secondly,
the built-in rewinding mechanism
keeps the strap
rolled up and out of
the way. The 4 clamp
pads that come with the
strap clamp can handle
any angle from 60 to 180
degrees.
STRAP CLAMP
AC05569 ..................................................$2.95
200 LB VERTICAL
HANDLE TOGGLE CLAMP
TGC-001 ..................$10.95
500 LB VERTICAL
HANDLE TOGGLE CLAMP
TGC-003 ..................$12.95
750 LB VERTICAL
HANDLE TOGGLE CLAMP
TGC-005 ..................$19.95
Bessey Track Clamp Set
• With special guide on the top
section for grooves 12 x 6.5 mm
to 12 x 8 mm
• Use with adapter on the bottom section
and rotated top section for secure
fastening of guide rails from
Festool, Protool, Metabo, Makita, Hitachi/
Hikoki, Dewalt, etc. and for
clamping in profiles and on
work benches
• Use with adapter on the
top or bottom section for
step-over clamping
• Use with or without adapter – for clamping
or spreading
• Clamping force up to 100 lbs
• Ergonomically shaped 2-part plastic handle
with pump lever behind the rail
BESSEY TRACK CLAMP SET AC20500......$36.95
500 LB HORIZONTAL
HANDLE TOGGLE CLAMP
TGC-007 ..................$12.95
750 LB HORIZONTAL
HANDLE TOGGLE CLAMP
TGC-008 ..................$18.95
4" Framing Vise
This cast-iron
Picture Framing Vise has
a 4" capacity for securing a
wide range of frame sizes.
Designed to permanently
mount to a benchtop, the
Framing Vise features 3-point
leveling, tilt, and 360° swivel. Large rubber-
gripped handles make clamping quick and easy. Overall
size is 3-3/4" x 3-3/4" x 5-3/4" tall and weighs 12.4 lbs.
4" FRAMING VISE WK32270......................$69.95
300 LB PUSH-PULL
CLAMP TGC-009 ....$15.95
800 LB PUSH-PULL
CLAMP TGC-010 ....$20.95