Measure & Layout
With the Mite-
R-Gage, you can
measure and lay out all types of
angles, both inside and out, check corners
for square, check and set table saw
blades and more. The markings are
paint filled and very easy to
read and the gage can be locked
in any position. To maximize ease
of use and versatility, the Mite-R-Gage has
two scales. Inside or outside angles can be measured
and read quickly and accurately to an accuracy
of 0.25 degrees.
The Center Finding Rule is another measuring and layout
tool no shop should be without. One edge is a standard ruler/
straight edge that's graduated in 16ths. The other side acts
as a center finder and is graduated in 1/32". You'll be able
to quickly find the center point without any guesswork or trial
and error. Two sizes are available.
12" CENTER RULE IP34120 ...................$10.95
24" CENTER RULE IP34240 ...................$18.95
The Kreg Multi-Mark™ is an incredibly handy multi-purpose
marking and measuring tool, perfect for a wide
variety of household and jobsite applications. The Multi-
Mark™ features three different scale configurations, a
built-in level, a handy 3/16" reveal gauge, and much
more. Whether you need to transfer a measurement for
that last ceramic tile, layout some mitered corners, or just
straighten a few simple picture frames, the Multi-Mark™
is the only tool you'll need to get the job done!
KREG MULTI-MARK KR29000 .................$14.99
The hook rule is a heavy duty, engraved rule is hardened
stainless with a satin chrome finish. One side is marked
8ths and 16ths while the other is marked in 32nds and
64ths. The hook on the end can be switched to either side.
12" HOOK RULE SATIN CHROME
12" Combination Square
Quick And Easy Way To
The Middle Every Time
The Centerpoint tape measure makes it very easy to find the
center point of your work, both in the shop and on the job.
Whether it's a desk top or a framed wall, finding the center
has never been faster. Simply measure the distance using
the top scale and then find the same reading on the bottom
scale. It's that quick. The heavy gauge tape and tough plastic
housing make this tool as durable as it is useful.
CENTERPOINT TAPE 16' CF97161 ...$16.95
With this good quality shop rule, you'll be able to measure in
both fractional and metric readings. The two edged fractional
side is engraved with both 32nds and 64ths.
12" STAINLESS STEEL RULER IP34007 ....$5.95
The Starrett 12" Combination Square with Square Head
features a reversible lock bolt, scriber, spirit level, and hardened
steel, photo-engraved blade with regular This product
also includes a cast iron head with black wrinkle finish. 12",
4R Grad, Regular Blade
12" COMBINATION SQUARE W/ SQUARE
HEAD SE50055 ..........................................$84.95
Pencil Compass & Divider
The 6" x 3/4" rule is ideal for the small tool kit or pocket.
Both sides are fraction with 32nds & 64ths on one side and
8ths and 16ths on the other.
6" STAINLESS STEEL RULER IP34006 ......$3.95
Pencil/Compass Scribers are
handy in carpentry and woodworking.
This heavy duty compass
will mark a circle up to 9"
diameter. It can be used as a
scribing guide for edges and many
other layout operations. Made of
die cast metal and is rust resistant.
PENCIL COMPASS &
14" Digital Angle Rule
Our 14" Digital Angle
Rule can be
used for many
It will enable
you to accurately
set angles on everything from miter
gauges, table saw blades to miter saws. It is an
excellent tool for those doing trim carpentry. The digital
Protractor can be zeroed out at any point and can be
changed where you can read it from either end.
14" DIGITAL ANGLE RULE IP35412 .......$29.95
5 Piece Caliper Set
This 5-Piece Woodworking Caliper Set includes compass,
straight dividers, inside calipers, outside calipers, and inside/
outside calipers. It’s a perfect assortment for wood turning
and general layout work. WK45960..................$49.95
Traditional marking gauges are a must in any shop.
The most practical is the beech gauge. It's 100% beech
and measures 8" overall. The next step up is the rosewood
marking gauge. It has polished brass in the wear
areas along with a brass, tightening knob.
Perfect Butt Profile Scriber
Point 2 Point
The Profile Scriber holds a sprung pencil at the center of 4
interchangeable tracing wheels. Thus ensuring the scriber
(pencil) remains at an equal distance from the profiling
surface throughout the scribing process. The "Perfect Butt"
Profile Scriber is designed to allow flush butting of worktops,
kitchen tops, shelves, flooring and
other work pieces into uneven and
irregular surfaces, and works wonders
for offsetting contours in creating templates
and forms for bent-wood lamination.
Interchangeable wheel sizes:
1-1/8" - 2" - 2-3/4" - 3-1/2" diameter.
PERFECT BUTT PROFILE
SCRIBER MR00002 ................................$29.95
ROSEWOOD & BRASS
How do you divide a span of wood - or any other material - into
several equal parts instantly without the use of calipers, a ruler
or calculator? Just expand then contract the Point 2 Point
to give an instant visual guide to locations. Quickly work out
the correct number and position of dowels, screws, pins, or
calculate the maximum number of strips that can be cut from
a board. The Point 2 Point has a 4-point brass locking mechanism
enabling you to transfer your locked measurements
between boards or over large areas. Designed for both right
and left-handed use with a maximum expansion of 2ft.
POINT 2 POINT MK2 MR00022 ..............$24.95
This marking knife features
a hardened and tempered
carbon steel blade and rosewood
handle. It is ideal
for various marking applications,
everything from tails
and pins to straight cut lines.
2" MARKING KNIFE RH CN00112 .......$12.95
Page 53 of 132
Magnified View - Please use mouse to move page for easier readability