Machine Accessories
Cool Blocks
Power Twist Drive Belt
Customize Your Motor-Driven Set-Up
Kreg Cutting Products
Cool Blocks extend the life of
your band saw blade
and improve blade performance.
Cool Blocks
are made of a composite
material called "Graphite
Impregnated Phenolic Laminate". It contains
3 synthetic dry lubricants that lubricate
the blade but do not make it oily. Cool Blocks
allow the blade to run cooler and last longer. They work particularly
well on thinner blades used for tight radius work.
KREG PORTABLE
CROSS CUT
KR14000 .............$24.99
KREG CROSSCUT
STATION
KR04100 .............$59.99
We've latched on to the best
drive belts for your motor driven
tools - the PowerTwist V-Belts.
These offer durability, convenience,
and exceptional vibration
reduction. A real plus is that they
are easily installed without dismantling
your drive components.
These unique and functional
belts will prove to be wonderful
investments in your shop.
COOL BLOCK SET
DELTA 14" SAW CBL-001 .......................$14.95
14" BANDSAWS CBL-003 .......................$14.95
Jointer Planer Knives
Price Per Foot
3/8" DRIVE BELT FD04050 ...........................$12.95
SAVE - 1/2" DRIVE BELT 4 FOOT PACK
FD04181 ...........................................................$44.95
Kreg Rip Cut
Kreg Crown Pro™
These industrial planer and jointer knives are made from a
premium high speed steel stock. Each is pre-ground to a razor
sharp edge to provide a super smooth cut.
6" X 5/8" X 1/8" POWERMATIC / DELTA / JET
FR60248 .................................................$33.97
8" X 3/4" X 1/8 FR60354 ............$44.97
15" X 1" X 1/8" DELTA / JET FR60514 .$81.97
DEWALT / DW735 DW7352 .............$59.95
The Kreg Rip-Cut edge guide system enables your circular
saw to make straight, accurate and repeatable cuts in panels
and sheet goods. Simply mount your saw on the universal
sled and slid the sled onto the aluminum rail. You’ll be able
to make cuts from 1" to 24".
KREG RIP CUT KR26850...........................$39.99
This uniquely designed tool holds your trim at the exact
angle required, eliminating the need for advanced compound
miter cuts and difficult ‘coping'. It's unique curved design lets
you compensate for a wide variety of crown molding spring
angles, and it's extension arms let you work with crown up to
5-1/2" wide. 10" saws will work with crown up to 3-1/2" wide,
depending on manufacturer. 12" saws will work with crown
up to 5-1/2" wide, depending on manufacturer.
KREG CROWN PRO KR28000 ............$29.99
Ceramic Cool Blocks
Pitch & Gum Remover Increase The Life
And Performance Of Your Cutting Tools
The performance and life of your cutting tools
are clearly affected by pitch and gum build
up. Not only does pitch and gum shorten
the life of the cutting tool, but it can leave
sloppy cutting edges and burn your stock.
Sprayway® Pitch and Gum Remover is an
easy one step solution to these problems.
Simply spray it on the blade, bit or cutter and
wipe it off. It's that simple. So remember, it
pays to keep those expensive cutting tools
at their best.
SPRAYWAY® PITCH & GUM
REMOVER SW00836 .......$10.95
Ceramic Thrust Bearing
Ceramic cool blocks will make your blade run cooler, cut
better and last longer. The blocks themselves will easily outlast
any other block on the market! Ceramic cool blocks are
an excellent and affordable way to make a very noticeable
improvement to an already good bandsaw.
COOL BLOCKS
DELTA 14" SA10000 ...........................$20.95
JET 14" SA10001 ...........................$20.95
These are the bearings,
upper and lower, that
are behind the band
saw blade and keep it
in place when you apply
pressure making your
cut. The stock bearings
are not made for the type
pressure they absorb. They are made for pressure along the
edge, like on a router bit. These ceramic bearings don't spin
like the ones that come on the bandsaw. They are fixed and
will never wear out. If they, for some reason, were to slightly
wear, they can be rotated the full 360 degrees. They will
easily out last most bandsaws. The bearings fit Jet, Delta
and most other 14" imported bandsaws.
CERAMIC THRUST BEARING/ JET,DELTA 14"
• 1-3/16" DIAMETER X 3/8" THICKNESS, CENTER HOLE 25/64"
SA10002 ......................................................$24.95
I-Box Joint Box Jig
Kreg Precision Bandsaw Fence
VIDEO ONLINE
Kreg’s
Accu-Cut track
guided cutting system,
fitted with your
circular saw in the universal
sled, enables you
to make straight and accurate
cuts in large panels and various sheet
goods. Whether ripping, making crosscuts or
angled cuts, Accu-Cut does it with simple set up,
precise accuracy and total control.
KREG ACCU-CUT KR27000.........................$79.99
Kreg
Accu-Cut
Introduce a new level of accuracy to your band saw with
Kreg's Precision Band Saw Fence. The fence is adjustable
in two dimensions for ease in setting its parallel to
the blade. Cutting accuracy and repeatability is further
enhanced by a precision lens cursor that reads off the
included scale. It mounts to most 14" band saws including
Jet, Delta, General, Grizzly and many more. Optional
accessories include a micro-adjuster and a re-saw guide.
KREG PRECISION BANDSAW FENCE
KR72000 ....................................................$119.99
The I-Box is an evolutionary leap forward from conventional
box joint methods - this single jig can be used on both your
table saw and your router table, and the IBox's dual pitch
lead screw mechanics easily micro-adjust joint tightness &
provide a whopping 1/8" - 3/4" range of pin widths. It's capable
of making good fitting box joints using any width cutter
within that range into lumber from 1/4" to 1" thick.
I-BOX JOINT JIG IN88889 ...................$219.95
