Hand Saws Veritas Hand Saws 3" Veneer Cutting Saw Japanese Saws Veritas Hand Saws are a blend of tradition and technology, with critical characteristics of a classic fine joinery saw, made using modern production processes and state-of-the-art materials. The blades of the dovetail saws have 14 rip-cut teeth per inch for stock thicker than 1/2" or 20 rip-cut teeth per inch for stock under 1/2" thick. The 16 tpi crosscut saw blade is best used for cutting across or perpendicular to the grain. Carcass Saws are typically used to cut joints in drawer runners, dividers, and stretchers (the framework or carcass of a piece). They are scaled for smaller work than a tenon saw. Carcass saws are available in rip and crosscut versions following the same tooth formats as the dovetail saws and the crosscut saws mentioned above. Suizan has created the highest quality Japanese hand tools in Japan for over 100 years. Crown's double edged veneer saw is a necessity when doing veneer work. The double sided saw has 15 tpi and can be sharpened. With the offset handle, getting into the corners will be no problem. It cuts on both the pull and the push. VENEER CUTTING SAW CN00187V .....$29.95 10" Reversible Saw PULL SAW 9-1/2" DOUBLE EDGE #SU50000...........................................$35.95 SU50000 BLADE #SU50005 ..............$19.95 DOVETAIL PULL SAW 9-1/2" #SU50010 ..........................................$39.95 SU50010 BLADE #SU50015..............$22.95 DOVETAIL PULL SAW 8" #SU50020 ..........................................$46.95 SU50020 BLADE #SU50025 ..............$24.95 DOVETAIL PULL SAW 6" #SU50030 ..........................................$27.95 SU50030 BLADE #SU50035...............$19.95 PULL SAW 10-1/2" SINGLE EDGE #SU50040 ..........................................$32.95 SU50040 BLADE #SU50045 ..............$19.95 FLUSH CUT PULL SAW 7" #SU50050...........................................$35.95 SU50050 BLADE#SU50055 ..............$24.95 PULL SAW 7" DOUBLE EDGE #SU50060 ..........................................$28.95 SU50060 BLADE #SU50065 .............$20.95 DOVETAIL PULL SAW 7" #SU50070...........................................$29.95 SU50070 BLADE#SU50075...............$20.95 FLUSH CUT PULL SAW 5" #SU50080...........................................$20.95 The Crown reversible flush trim saw is ideal for all applications where you have to cut close to a flat surface. This would include trimming dowels used to plug screw holes and trimming the length on through tenons. The cuts can be made without any damage to the surface due to the set of the teeth. It can be changed to accommodate right or left hand cuts. 10" REVERSIBLE SAW CN18700 .............$39.95 A. B. 6" Flush Cutting Saw C. Crown also makes a Japanese style pull-to-cut flush trim saw. Unlike the reversible saw, this saw has the teeth set in a manner which will allow the saw to cut flush, on both sides of the blade, but not mark your surface. 6" FLUSH CUTTING SAW CN00187F ......$26.95 D. E. NOTE: Handles will be changing from bubinga to maple VERITAS DOVETAIL SAW A. 20 TPI VT05050 .............................$74.95 B. 14TPI VT05051 .............................$74.95 VERITAS CROSSCUT SAW C. VT05061 ..........................................$74.95 VERITAS CARCASS SAW / CROSSCUT D. VT05701 ..........................................$79.95 VERITAS CARCASS SAW / RIP E. VT05705 ..........................................$79.95 Deluxe Universal Razor Saw The Deluxe Universal Razor Saw is the perfect saw for model and miniature making and detailing in carpentry and cabinet making. It's teeth will cut all types of wood, plastic, copper and brass. The saw with an aluminum miter Box is the perfect set up for all around detail work. The miter box, with 90, 45 and 30 degrees, has channels grooved in the bottom to help hold dowels and strips in place. It can be used with materials up to 15/16" thick and 2" wide. DELUXE UNIVERSAL RAZOR SAW 24 TPI ZN35560 ........................................................$14.95 DELUXE SAW & MITER SET ZN35221 .....$28.95 Veritas Gent's Saw 8" Gents Saw 187 Rigid Veritas gent's saws have a 7-7/8" long high-carbon steel blade that is just 0.015" thick with 0.003" of teeth set per side. The 20 tpi rip saw has teeth with a 14° rake angle and a 60° included angle. The teeth on the 22 tpi crosscut saw have a rake angle of 15°, an included angle of 60° and have been filed with alternating 15° bevel angles so that they sever rather than tear wood fibers. Both saws have a cut depth of 1-5/8". For strength and rigidity, the glass and stainless steel-filled polymer spine is molded over the blade and handle stud. The 4-1/4" long hardwood handle is secured with a brass nut. VERITAS GENT'S SAW RIP 20 TPI VT51001 ............$54.95 CROSSCUT 22 TPI VT51005 ..........$54.95 Crown’s Gent Saw features an 8" x 17tpi high carbon steel blade which is fitted in a brass back with a Rosewood handle. This saw is ideal for joinery and other detail work. Made in Sheffield. 8" GENTS SAW CN00187 ..........................$30.95 VERITAS DOUBLE FLUSH CUT SAW VT53601 ...................................................$29.95
Magnified View - Please use mouse to move page for easier readability